Философия шлифования
oelheld предлагает Вам от бюджетных до высокопро- изводительных масел для шлифования
AquaTec 1550 - Emulsifiable cooling lubricant concentrate
- To enlarge the picture please click
AquaTec 1550 is an EP cooling lubricant that can be mixed with water. It contains mineral oil (42% approx), is free of amines, boric acid, chlorine, heavy metals and it can be used for all metal cutting of steel, cast-iron, copper alloys and aluminium.
AquaTec 1550 produces remarkably little foam, so there will be no problems with foam, even if very soft mixing water is used. There is no resinification of dried residues of the emulsion and thus it is easily re-emulsifiable.
When mixed with water, a finely dispersed, whitish cooling lubricant emulsion of high stability is produced, which combines a strong cooling effect with a good lubricating effect and increased pressure absorption.
AquaTec 1550 is free of biocides and because of specially selected raw materials is extremely resistant against micro-organisms and allows for a long emulsion service life.
AquaTec 1550 has a pleasant odour and is proven to be dermatologically safe.
AquaTec 1550 contains anion active and nonionogenic emulsifying agents, EP additives and anti-corrosion-agents.
Advantages:
- wide range of applications
- free of boric acid and amines
- high stability and lifetime even in single filled machines
- excellent greasing and good corrosion inhibitor for ferrous metal
- brilliant flushing effect
- low maintenance
- suitable for all water qualities
- micro-emulsion with low odour
- skin friendly low pH value
Technical facts | |||
|---|---|---|---|
Colour | yellow-brown | ||
pH-value 10% | 9,0 | ||
Density at +20 °C [g/cm³] | 0,95 | ||
Kin. viscosity at +20 °C [mm²/s] | ca. 120 | ||
Mineral oil content | ca. 41% | ||
Corrosive effect 5% | mark 0 | ||
Mixing instruction:
Mix AquaTec 1550 always by simultaneously stir in drinking water, never the other way around. The received concentration can be checked by using a hand refractometer.
Refractometer factor = 1,0
Koncentration | 5% (1:20) | 6% (1:17) | 7% (1:14) | 8% (1:12) | 10% (1:10) |
Refractometer | 5,0 | 6,0 | 7,0 | 8,0 | 10,0 |
In our brochure you will find all information about AquaTec 1550, the longstanding development as well as the advantages of the product..
